DIY trailer building-The cheaper option

Motorbike Carrier
*Luggage racks also available *


This Motorbike Carrier can replace your large, hard to store and hard to manoeuvre Bike Trailer.
Weighing in at about 26kgs makes it easy to install and easy to store.
It is built from galvanised RHS for long life and is built TOUGH.
Load rating 160kgs.

How the bike Motorbike Carrier Works
Walk your bike up the ramp and use the two tie down points at the front of the Bike Carrier to strap your handlebars down. Then simply strap your rear wheel to the carrier. The ramp then locks on to the front of the carrier and your ready to go!
(Tie downs are not supplied and should be fitted correctly as with any carrier)

Added Extras!
This bike carrier has been wired with brake lights and blinkers (which is a road safety requirement as your normal lights will most likely be obscured)
The lights are protected by steel covers and are wired into a 7 pin flat plug so you simply plug it into your trailer plug.
This bike carrier also has a number plate mount & light at the rear.
Carriers now finished with super tough two-pac paint for durability!

Fitting To Your Vehicle
This motorbike carrier will fit vehicles with a â??Hayman Reeceâ?? tow hitch or equivalent. This type of tow hitch has a removable sleeve that is 50mm x 50mm OR 40mm x 40mm. You will also need to consider the down-force on your hitch and make sure it has a sufficient rating.(This can be done by phoning your local towbar fitter or checking on your tow bars compliance plate witch is attached to your hitch)
The total length of this carrier is 190cm and will stickout approx 850mm from your car(will vary on different cars).





Wingham Welding Works now sells all the leading brands in trailer components, including 
*Complete DIY kits
*Trailer axles
*Trailer springs
*Mud guards
*Trailer brakes components/kits
*Trailer LED lights
*Trailer Couplings 
*Trailer Hubs
*Boat trailer Accessories
*Any and all trailer parts.